zulooglam.blogg.se - Strain relief connector for laser diode

#Strain relief connector for laser diode install#
#Strain relief connector for laser diode upgrade#
#Strain relief connector for laser diode pro#
#Strain relief connector for laser diode series#

Limit switches are included (at all models, to my knowledge) to enable automatic homing.

The linear rail on the x-axis is now included as standard on all models.

Thus, the range can be extended to over 90 × 90 cm.

There are now expansion kits not only for the y-axis, but also for the x-axis.

Now it has become much easier and an exchange lens is already included. In the past, there were often problems with destroyed lenses (due to lack of maintenance).

The lens of the modules can now be replaced.

As with the previous models, the Metal Air Assist nozzle is precisely adapted to the module and delivers perfect results.

The pump is also included in the scope of delivery!

#Strain relief connector for laser diode install#

It is no longer necessary to install an extra relay.

#Strain relief connector for laser diode series#

The motherboard of the S30 series has integrated the control of the Air Assist.

Unfortunately, the very first batch of lasers did not include a printed assembly manual. Early adopters that already bought an S30 5W or 10W kit unfortunately didn’t get the upgraded frame.

#Strain relief connector for laser diode upgrade#

Update: starting from November 2022, all S30 laser kits are delivered with the enhanced/strengthened frame! So, no need to upgrade the frame anymore if you choose the 20W upgrade kit (once it is existing).

#Strain relief connector for laser diode pro#

You can NOT connect old modules to a Pro Max and you can NOT mount the 20W module to old lasers. Both the frame, module and pump are specific to this model. So, you can upgrade a S6, S9 or S10 with a S30-5W or S30-10W module, or install the new Air-Assist-Kit (with board and pump) and continue to use the old module. This means that all modules, pumps, and mechanics can be exchanged with each other (assuming suitable mounts for the modules, among other things). The most common question or answer right from the start: the S30-5W and S30-10W models are essentially compatible with the older laser generations from Sculpfun. I also try to answer some frequently asked questions. In the following, the essential characteristics and differences are presented. The 20W module is fundamentally new and has no predecessor model. Particularly noteworthy is the metal Air Assist nozzle with replaceable lens, as well as the smaller focus size. Compared to the predecessors, further developments have been integrated into all modules, so the 5W and 10W modules are also new modules (and upgraded compared to the older modules). The associated laser modules are available in the power levels 5W, 10W and for the first time 20W. It can be operated conform to EN 60825-1 by using a switchbox.After the S6, S9 and S10 lasers, which each represented a laser type or class, there is now for the first time the S30 series, which includes three different laser setups. This OEM version has no key switch or interlock and is not conform to EN 60825-1.

Other connector types including FC PC, DIN or AVIO, or E2000.Multiple fiber output cables (51nanoC, single-mode only).

The fiber cable has a strain-relief and a protective sleeving (Ø 3 mm). The fiber cable is equipped with an FC APC type connector (8°-polish). As a result the beam profile is rotationally symmetric with Gaussian intensity distribution. The source is fiber-coupled to a single-mode fiber cable. The output power is adjustable using a potentiometer or using the two modulation inputs for analog and TTL. < 0.09 % of P o (RMS, Bandwidth < 1 MHz)), reduced coherence length (≈ 300 µm) and a lowered speckle contrast. The fiber-coupled Laser Diode Beam Source of type 51nano-N-785-12-Q06-P-5-2-18-0-150 has a reduced power noise (typ.